Dig.Tech CineEdge Display

This is our brand new Cine Edge display.

Designed with the desire to provide an ancillary display that can squeeze onto a packed desk/cart and display additional vital information.

It works as an ideal display for use with software like Omniscope and ScopeBox, allowing you to set up whatever scopes you need right next to your primary display.

It’s machined out of solid aluminium and is made to last years, we’ve cut no corners when it comes to quality and we think it shows.

Single-cable USBC operation means minimal clutter, and we’ve integrated a cable clamp to prevent accidental cable disconnects when moving.

There will be a cable clamp we designed in the box, but if you want to make your own design then this is the hole spacing:

By default we do not include a USBC cable or HDMI to Mini HDMI cable as we would like to reduce cable-waste wherever possible. However if you need these cables please select them and we will include them for no additional charge.

There are buttons on the reverse of the display where you can set up the monitors brightness/contrast etc. However we recommend this app: https://github.com/MonitorControl/MonitorControl
This adds a menu in the upper menu bar to allow you to control the brightness easily from the touchscreen. Once installed you’ll need to jump into the settings and under the displays tab enable advanced settings, then set the brightness DCC max to 40. This will prevent a ‘looping’ of the brightness as you move the slider.  

Specs:

• 14.5” 2650×720 in-cell touchscreen TFT LCD panel
• Brightness: 350nits typical
• Contrast Ratio: 1500:1 typical
• Active screen area: 355×100mm
• Overall body dimensions: 373.3x121x19.75mm
• Touch: 10-point in cell touch
  • *Poor OSX support, please see note.
• USBC single cable operation
• Mini-HDMI option with USBC power input
• Weight: 1160g

Mounting:

• ¼-20: x3 top, x14 rear
• ⅜-16: x12 rear
• Arri style locking pins, 10.4mm and 15mm spacing
• VESA 75mm and 100mm
• Cable organiser/clamp for preventing cable disconnect.

In The Box:

• CineEdge Display
• Cable Clamp and screws
• Optional:
  • USBC Cable 1m
  • HMDI to Mini HDMI Cable 1m

* Note on touch: Currently OSX does not support this touch panel fully. Touch works as single point touch but the mouse must be moved to the display manually.